https://boards.hellobee.com/ Pregnancy, Baby and Parenting blog, by Hellobee en Sat, 14 Nov 2026 17:36:49 +0000 https://boards.hellobee.com/topic/beadboard-wall#post-723277 Wed, 17 Apr 2013 15:40:44 +0000 littlek 723277@https://boards.hellobee.com/ <p>I've never done it, but I hear it's easy. I love the look of it! </p> https://boards.hellobee.com/topic/beadboard-wall#post-723249 Wed, 17 Apr 2013 15:27:38 +0000 pelikila 723249@https://boards.hellobee.com/ <p>We've done it in our entry hall way and the nursery. For us the key was to paint first, then hang. Then touch up paint. </p> https://boards.hellobee.com/topic/beadboard-wall#post-723178 Wed, 17 Apr 2013 14:56:44 +0000 crabbabs 723178@https://boards.hellobee.com/ <p>@LindsayInNYC: Technically, you don't *have* to remove the baseboards and can install the bead board above them, but it won't look professional.</p> <p>To remove the baseboards, use a utility knife to score along the baseboard at the top where it meets the wall. This will prevent your drywall and paint from ripping when you remove the boards. </p> <p>Then, starting at one end, use a stiff metal putty knife and work it between the wall and baseboard slowly pulling it out. It takes some elbow grease. You can remove any nails left in the boards and reuse them. We were really sloppy and are just going to buy new ones since our space is small. </p> https://boards.hellobee.com/topic/beadboard-wall#post-723072 Wed, 17 Apr 2013 14:18:16 +0000 LindsayInNY 723072@https://boards.hellobee.com/ <p>@Sprite: It sounds fairly easily yet complicated all at the same time, LOL! There are already baseboards in the room so I'm assuming we'll have to remove/replace those. </p> https://boards.hellobee.com/topic/beadboard-wall#post-722956 Wed, 17 Apr 2013 13:39:29 +0000 Sprite 722956@https://boards.hellobee.com/ <p>It really is easy to install, especially if you get the sheets. Like pp have said, get some liquid nails to help hold it to the wall so you can use less nails, and be careful about where you put finishing nails along seams, where they won't be covered by your baseboards and chair rail. That was the hardest part, hiding the finishing nails along the seams, since the beadboard sheets are so thin, it was really hard to get the nails buried deep enough to smoothly cover them with wood filler. My husband ended up dremeling a few of the nail heads down, just so they'd hide better.</p> <p>Oh, and also, if you are doing the sheets and think there's any chance your beadboard might get wet, I highly recommend a coat or two of polyurethane after you paint it. The beadboard sheets are just flimsy particleboard under a layer of primer, that will swell and bow if they get wet at all. The Minwax Water-Based Polycrylic Protective Finish in “Clear Gloss” is great for over white paint, since it really does dry clear, and not with a yellow tinge like some polys have. </p> https://boards.hellobee.com/topic/beadboard-wall#post-722919 Wed, 17 Apr 2013 13:25:58 +0000 MrsTiz 722919@https://boards.hellobee.com/ <p>My company installs this daily, super easy.</p> <p>You can just slap it on the wall and use a nailgun to nail it in place. </p> https://boards.hellobee.com/topic/beadboard-wall#post-722915 Wed, 17 Apr 2013 13:22:36 +0000 2PeasinaPod 722915@https://boards.hellobee.com/ <p>DH has done it in our half bath downstairs and said it was one of the easiest parts of the bathroom reno! He also used liquid nails! </p> https://boards.hellobee.com/topic/beadboard-wall#post-722912 Wed, 17 Apr 2013 13:20:27 +0000 Chillybear 722912@https://boards.hellobee.com/ <p>Just realized there were no baseboards in that pic </p> [attach=132/13/mlewa4.450x600.396585_10100371567153346_359104736_n.jpg] https://boards.hellobee.com/topic/beadboard-wall#post-722905 Wed, 17 Apr 2013 13:17:50 +0000 Chillybear 722905@https://boards.hellobee.com/ <p>We did the bead board in our powder room. We used the 8' sheet and cut them down to just below the window they were preprimed in white. We used liquid nails (its a thick glue that comes in a caulking tube) and a few finishing nails at the top and bottom and along some of the more difficult seams. The first picture shows the beadboard before trim was added. We caulked the crap out of all the seams and painted the boards 2 coats of white. Then we added a ledge instead of chair rail and wide baseboards. We caulked all those seam and nail holes and painted some more. 2nd picture is finished. </p> [attach=132/13/mlew5q.450x600.523420_10100363230904256_1962080063_n.jpg] [attach=132/13/mlew5s.450x600.21181_10100371567647356_179281627_n.jpg] https://boards.hellobee.com/topic/beadboard-wall#post-722856 Wed, 17 Apr 2013 13:01:30 +0000 LindsayInNY 722856@https://boards.hellobee.com/ <p>@lemondrop: Yes, please!! We don't have a ton of options where to do it but have a small dining room area that would be perfect. I *love* the look of it! </p> https://boards.hellobee.com/topic/beadboard-wall#post-722844 Wed, 17 Apr 2013 12:58:18 +0000 lemondrop 722844@https://boards.hellobee.com/ <p>Yes! We did this with our nursery. I'm at work today, but later tonight or tomorrow I can elaborate. It was a lot of work, but I absolutely LOVE it! </p> https://boards.hellobee.com/topic/beadboard-wall#post-722584 Wed, 17 Apr 2013 11:54:13 +0000 LindsayInNY 722584@https://boards.hellobee.com/ <p>@crabbabs: Liquid nails?! What are those?? We were thinking of white at 3-4" height. Basically, average chair rail height. Depending on how it's sold of course. I'll have to google some tutorials! </p> https://boards.hellobee.com/topic/beadboard-wall#post-722563 Wed, 17 Apr 2013 11:48:26 +0000 crabbabs 722563@https://boards.hellobee.com/ <p>We are installing one right now in our laundry room. If you have basic handyman (handywoman?) skills you should be able to do it no problem. </p> <p>We did our at 60" so we had to buy the 8' panel and have it cut down, but they sell pre-cut pieces with tongue and grove edges at the height of your picture that would make installation even easier. </p> <p>We read several tutorials online and used liquid nails and small tack nails to install it, but you would probably be fine using only the liquid nails. </p> <p>We bought white pre-finished boards, but we are painting them too. Hopefully I will finish painting them and install the trim at the top tonight. </p> <p>I'd be happy to answer any other questions :) </p> https://boards.hellobee.com/topic/beadboard-wall#post-722555 Wed, 17 Apr 2013 11:46:23 +0000 LindsayInNY 722555@https://boards.hellobee.com/ <p>@BabyBoecksMom: @Mrs. Lemon-Lime: From what I can tell, you buy it in sheets, attach it with a nail gun (or hammer/nails, I assume) and then put a chair rail on the top? MIL said the hardest part is cutting around corners and outlets. So she's going to bring all the tools out here with her :) </p> https://boards.hellobee.com/topic/beadboard-wall#post-722507 Wed, 17 Apr 2013 11:34:37 +0000 Mrs. Lemon-Lime 722507@https://boards.hellobee.com/ <p>I haven't installed it myself, but HGTV males it look easy. I especially love beadboard in bathrooms for a cottage feel. </p> https://boards.hellobee.com/topic/beadboard-wall#post-722496 Wed, 17 Apr 2013 11:32:44 +0000 BabyBoecksMom 722496@https://boards.hellobee.com/ <p>I haven't done it but I've seen it done on HGTV. (They always make it looks easy!). DH said it's actually pretty easy, so good luck :-) Can't wait to see the finished result! </p> https://boards.hellobee.com/topic/beadboard-wall#post-722475 Wed, 17 Apr 2013 11:29:32 +0000 LindsayInNY 722475@https://boards.hellobee.com/ <p>I want to put beadboard in our dining room. It seems fairly easy to install. Has anyone done it before? MIL will be visiting this summer and has done it before so she's going to help me. I attached a picture for those who aren't familiar with the actually term for it :) </p> [attach=2229/13/mler59.500x364.beadboard.jpg]